Subscribe:

Thursday, April 12, 2012

installation an Above Ground Swimming Pool


The addition of an above ground swimming pool means making a decision to install it yourself or bring in the pros to do the job. While hiring a contractor for installation is a tempting proposition, it can also be a pricey one. In fact, you can spend almost as much as the pool itself to hire someone to do the labor. That's why many homeowners turn the above ground pool kit into a DIY project. This article will provide the basic steps of above ground pool installation to help you determine whether you are up to the task.
Obtain Proper Permits
Some areas require special building permits before you can install an above ground pool. Make sure you know all the regulations of your area, in terms of how much area should be cleared for the pool and what the easements need to be. Follow regulations to the letter, so you don't run into trouble with your swimming pool during or after the installation process.
Choosing a Location
This may be the most important step in the entire installation process. Choose a level area to save yourself serious excavation efforts. Make sure the spot is not above any buried power lines that could become damaged as you dig. You also want to ensure proper drainage, particularly if your new pool will interfere with the natural drainage system in your yard. It is important to choose a spot safely away from power lines and trees if you want to maintain a warmer water temperature and keep debris out of your pool.
Preparing the Ground
Once you have chosen the precise location for your pool, remove all vegetation from the area. Then you will need to consult with your specific manufacturer's instructions in terms of the hole that needs to be dug and the patio stones that must be used to level the pool's frame posts. Take your time to do this part of the installation precisely to the instructions given. Those many tons of water can create serious problems for your property and damage to your pool if the ground below is not properly prepared first. Once the ground is ready, add a liner material such as masonry sand to hold the base of the pool in place and compact it using a drumroller.



Assembly
Now you can begin assembling your pool walls according to manufacturer's instructions. Keep in mind that these panels are fairly large and heavy, so it helps to have a buddy or two assist you with this process. After the walls are fully assembled, you can add the liner, uprights and top rail according to the directions given with your pool kit. Finally, you will add the equipment like the pump and filter, which will probably involve drilling holes in the pool lining to accommodate these devices. When the pool is fully constructed, you can hook up your electrical and plumbing and the pool is ready for water. Make sure to balance your water with the proper chemicals before allowing any swimmer into your brand new pool.
siege auto
 
Related Posts Plugin for WordPress, Blogger...